Serving the Madison area  ·  (608) 292-6626  ·  Open Mon-Sat 7am-6pm
📞 (608) 292-6626 Free Quote

Spray Foam Insulation in Marshall, WI (53559) · Local Professionals

Madison Spray Foam Insulation · Fast response in Marshall and the Madison area · Free estimate 24h

✅ Written Estimates with R-Value & Thickness Specs 🛡️ Fully Insured 💸 Free Quote 24h 🕐 Mon-Sat 7am-6pm
+40Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Fully Insured✅ Written Estimates with R-Value & Thickness Specs

Marshall sits on the south edge of Dane County with a housing stock built mostly between the 1950s and 1980s, full basements underneath, and rim joists that frost and sweat every winter just like they do closer to Madison. Our team at Madison Spray Foam Insulation has been sealing and insulating homes across the Madison area since 2016, and we know exactly what happens when warm moist air meets a cold band joist in a Marshall basement on a February morning.

Homeowners in Marshall call us because their heating bills climb every year, rooms over garages stay cold no matter what the thermostat says, and condensation shows up in the attic or crawl space every winter. We fix those problems with spray foam insulation and air sealing that actually works, and we back it with a written estimate that spells out the R-value and thickness you are paying for.

Spray Foam Insulation in Marshall (53559)

Marshall's older homes sit on full basements with exposed rim joists and band joists that bridge the gap between the foundation and the first-floor rim. That rim is where cold outdoor air meets warm indoor air in winter, and the result is frost on the inside surface, condensation that soaks into fiberglass batts, and a constant leak of heated air straight down into the basement. Many Marshall homes also have attics where insulation has settled over three or four decades, leaving the edges and corners bare, or where bypasses around can lights and HVAC penetrations feed warm moist air into the coldest part of the roof assembly every time the furnace runs. Wall cavities in mid-century Marshall construction are often uninsulated or filled with thin, degraded batts that no longer perform.

We serve Marshall with closed cell and open cell spray foam, wall injection foam for retrofit work, crawl space sealing, and insulation removal and replacement. Our fully insured crews handle the tight access and the moisture risk that comes with Marshall's basement and attic conditions. We have been doing this work in the Madison area and Dane County since 2016.

Our services in Marshall

How a Job Works in Marshall

We start with a free on-site assessment at your Marshall address. We look at the rim joists, the attic, any crawl space, and the existing insulation. We ask about comfort complaints, moisture or condensation, and what you are spending to heat and cool. We measure the areas to be sprayed, confirm the R-value and thickness you need, and give you a written estimate with all the details before any work begins.

When the work day comes, our crew sets up mechanical ventilation to manage the smell during application and cure. We spray the foam to the thickness and coverage specified in your estimate, then remove any overspray and clean up. For rim joist and band joist work, we often have to remove old fiberglass first, and we haul that away. For attic work in an occupied home, we discuss the re-entry window, which is typically twenty-four to forty-eight hours depending on conditions. We leave your property clean and walk through the finished work with you.

Attic spray foam in Marshall typically runs from $1.50 per square foot for open cell to $1.20 per board foot for closed cell, depending on depth and coverage. Rim joist and band joist sealing starts around $650 for a typical Marshall basement. Wall injection foam for retrofit work runs from $2 per square foot. If old insulation has to come out first, add $950 and up depending on area and condition. Crawl space spray foam starts at $2,500. The final price depends on the square footage or board footage to cover, the R-value and thickness you need, whether you are using open or closed cell foam, and what has to be removed or repaired before we spray. Call us at (608) 292-6626 for a free estimate at your Marshall address. We will walk through the numbers and explain what you are paying for.

✅ Written Estimates with R-Value & Thickness Specs, fully insured for work in Marshall and nearby areas.

I live in an older Marshall home with a full basement and rim joists that get cold in winter. What does spray foam do for that?
Spray foam seals the rim joist to the foundation and the rim board to the band joist, eliminating the air leak that lets heated air escape and outdoor cold seep in. It also creates an air barrier that stops warm moist basement air from rising into the walls and attic, which is where condensation and frost happen. In Marshall's climate, sealing the rim joist is often the single biggest energy improvement you can make. We measure and specify the thickness and R-value your rim needs, and we give you a written estimate before we spray.
My Marshall attic has condensation on the roof sheathing and damp insulation in the corners. Can you spray foam over that?
No. We do not spray foam over wet or contaminated insulation. If your attic has moisture, we have to find and fix the source first. That usually means sealing air leaks at the rim joist, the top plate, and around ductwork, vents, and can lights. Once the attic is dry and the source of the moisture is stopped, we can spray foam or add insulation. We walk away from jobs where the moisture problem is not fixed first. Call us at (608) 292-6626 to discuss what you are seeing.
What does spray foam cost in Marshall for a typical attic or rim joist job?
Attic foam starts around $1.50 per square foot for open cell foam, which is lighter and less expensive. Closed cell foam runs about $1.20 per board foot and is denser and more moisture resistant. Rim joist sealing typically runs $650 to $1,200 depending on the linear feet to cover and the depth of foam needed. The exact price depends on the area to cover, the R-value and thickness you need, and whether old insulation has to come out first. We give you a written estimate with all the details before any work begins.
Does Marshall require a permit for spray foam insulation, and who decides the R-value and thermal barrier rules?
Marshall has its own building department and permitting requirements, which may differ from Madison or other nearby towns. Attic ventilation, ignition barriers, and thermal barriers are governed by the energy and building code in force at your address and by the Marshall building official, not by us. We help you navigate what applies at your Marshall address, and we work with your local building department on inspections if they are required. The key thing to know is that the thermal barrier requirement (typically fifteen minutes of fire rating) is often misunderstood, and we get it right.
Can we live in the house while spray foam is being sprayed, and how long before we can use the attic or rooms again?
Yes, you can stay in the house. We use mechanical ventilation during application and cure to manage the smell and the fumes. The re-entry window is typically twenty-four to forty-eight hours depending on temperature, humidity, and ventilation. We tell you the specific window for your job, and we discuss how to manage the house during that time. If you have an HOA or a rental property with tenant rules, we coordinate with you on the schedule.
Are you insured for spray foam work at my Marshall home?
Yes. We are fully insured with general liability and workers' compensation coverage. We carry the insurance your property and your lender require. You can verify our coverage, and we will provide proof of insurance before we start work.
When is the best time to do spray foam insulation in Marshall, and does winter make it harder?
Winter is actually when we see the most calls from Marshall homeowners, because that is when the cold and condensation problems show up. Spray foam can be applied in cold weather, but the substrate has to be dry and above a minimum temperature, and we have to manage cure time carefully. Summer is easier logistically because temperatures are warm and the house is not being heated, but it is also the season when people are traveling or busy with yard work. Fall and spring are ideal. If you are seeing frost or condensation right now in winter, call us at (608) 292-6626 to schedule an assessment. We can often get you on the calendar before the next cold snap.
Why choose us?

Trusted professionals since 2016

🏅

Insured contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Fully Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sat 7am-6pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Spray Foam Insulation Services in Madison

All your work handled by qualified professionals in Madison

Attic Spray Foam Insulation

Attic foam built for Madison's long winters and ice dam season

Included in your service

  • Ice dam prevention along the eaves of older Isthmus homes
  • Air sealing top plates in mid-century Dane County attics
  • Continuous foam barrier sized for Madison's long cold winters
  • Blower door test to measure stack effect reduction here in Madison
Learn more→

Closed Cell Spray Foam Insulation

Closed cell protection for Madison's full basements and rim joists

Included in your service

  • High-density foam at rim joists across Dane County basements
  • Vapor retarder layer suited to Madison's humid summers
  • Rigid insulation for full basements on the Isthmus
  • Moisture control against condensation in Madison winters
Learn more→

Open Cell Spray Foam Insulation

Open cell fill for Madison's older walls and attics

Included in your service

  • Expanding foam fills stud bays in Willy Street area homes
  • Flexible air seal for Monroe Street bungalows and rentals
  • Sound-dampening fill for UW-Madison area rental walls
  • Vapor-open fill suited to Madison's humid summer swings
Learn more→

Wall & Injection Foam Insulation

Retrofit wall fill for Madison's balloon-framed houses

Included in your service

  • Drill and fill for uninsulated walls on the Isthmus
  • Matched siding patches for Willy Street area homes
  • Dense-pack fill for balloon-framed Monroe Street houses
  • Exterior access work suited to Madison's older housing stock
Learn more→

Crawl Space Spray Foam Insulation

Crawl space foam for Dane County additions and outbuildings

Included in your service

  • Sealed walls for crawl space additions across Dane County
  • Band joist foam to block moisture from Madison's humid summers
  • Vapor barrier upgrade next to full basement foundations
  • Moisture control tuned to Dane County's humid summer swings
Learn more→

Rim Joist & Band Joist Spray Foam

Rim joist sealing for Madison's full basements

Included in your service

  • Closed cell foam along rim joists in Isthmus basements
  • Frost and draft control where joists meet Dane County winters
  • Sealed band joist to stop condensation in full basements
  • Targeted foam pass sized for Madison's cold climate zone
Learn more→

Garage Spray Foam Insulation

Garage foam for Middleton, Fitchburg and Sun Prairie homes

Included in your service

  • Wall and ceiling foam for attached garages in Sun Prairie
  • Door header sealing for newer Middleton subdivisions
  • Heat retention upgrade for garages across Dane County
  • Air sealing suited to Fitchburg's two-story construction
Learn more→

Metal Building & Barndominium Spray Foam

Metal building foam for Sauk and Columbia county properties

Included in your service

  • Closed cell foam direct to steel in Columbia County buildings
  • Condensation control for barndominiums in Sauk County
  • Vapor barrier sized for this cold climate zone's winters
  • Thermal break foam for pole barns across Dane County
Learn more→

Commercial & New Construction Spray Foam

New construction foam for Dane, Sauk and Columbia counties

Included in your service

  • Whole-envelope foam before drywall in Sun Prairie builds
  • Commercial new construction foam across Dane County
  • Builder coordination for Fitchburg and Middleton projects
  • Air sealing in new builds matched to Dane County's cold climate zone
Learn more→

Insulation Removal

Old insulation removal for mid-century Dane County homes

Included in your service

  • Clearing settled fiberglass from mid-century Dane County attics
  • Removal of damaged material in older Isthmus homes
  • Clean-out before foam install in Madison basements and attics
  • Debris haul-away sized for Dane County rental properties
Learn more→

Insulation Replacement & Re-Insulation

Re-insulation for older Isthmus and mid-century Dane County homes

Included in your service

  • Full tear-out and foam re-install in Isthmus homes
  • Replacement sized for mid-century Dane County attics
  • New air barrier for rentals near UW-Madison
  • Upgrade from settled fiberglass to foam before Madison winter
Learn more→

Air Sealing

Air sealing to stop stack effect in Madison homes

Included in your service

  • Blower door test for homes across Dane County
  • Rim joist and top plate sealing before Madison winter
  • Bypass sealing for mid-century attics with ice dam history
  • ACH50 measurement suited to this cold climate zone
Learn more→
Verified client reviews

40+ Verified Client Reviews in Madison

⭐⭐⭐⭐⭐ 4.9/5 · 40 verified Google reviews

Free Quote

Get Your Free Quote

Spray Foam Insulation in Madison · Response within 24h · No commitment · ☎ (608) 292-6626

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Fully Insured 📍 On-site visits included in Madison ✅ No hidden fees 🕐 Available Mon-Sat 7am-6pm