Serving the Madison area  ·  (608) 292-6626  ·  Open Mon-Sat 7am-6pm
📞 (608) 292-6626 Free Quote

Spray Foam Insulation in Madison, WI (53792) · Local Professionals

Madison Spray Foam Insulation · Fast response in Madison and the Madison area · Free estimate 24h

✅ Written Estimates with R-Value & Thickness Specs 🛡️ Fully Insured 💸 Free Quote 24h 🕐 Mon-Sat 7am-6pm
+40Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Fully Insured✅ Written Estimates with R-Value & Thickness Specs

Madison's older Isthmus homes along Willy Street and Monroe Street sit over full basements with balloon-framed walls, thin or missing cavity insulation, and rim joists that frost and sweat through the long Dane County winter. Mid-century homes across the city carry attics where blown-in insulation has settled over decades, leaving cold edges and ice dams every January. Newer subdivisions toward Middleton and Fitchburg bring two-story construction with vented attics and attached garages that still leak air at the rim and top plates. Madison Spray Foam Insulation has served homeowners and property managers in Madison and the surrounding area since 2016, fixing the air sealing and insulation problems that heating and cooling bills expose.

When a room over a garage stays cold, when condensation shows up in your attic or crawl space in winter, or when your heating bill climbs despite the thermostat staying steady, the problem is usually air leakage and missing insulation in the spaces you cannot see. Our team diagnoses where the heat (or cold) is actually going, and we spray the foam or seal the air leaks that matter most to your comfort and your utility costs.

Spray Foam Insulation in Madison (53792)

Madison's housing stock splits sharply by era and location. On the Isthmus between Lake Mendota and Lake Monona, older homes and UW-Madison area rentals carry full basements with uninsulated or thin wall cavities and rim joists that collect condensation and frost every winter. The stack effect pulls warm, moist indoor air up through leaky attics and down through basement rim joists, driving heating costs and creating the cold spots and damp insulation that homeowners call us to fix. Mid-century homes across Dane County have attics where insulation has settled unevenly over forty or fifty years, leaving thin spots and air bypasses around can lights and at the eaves where ice dams form. Newer subdivisions carry engineered trusses and two-story construction with vented attics and attached garages, built quickly but still leaking air at the top plates and rim joists where warm interior air meets the cold exterior shell.

This is a cold climate with long snowy winters and warm, humid summers. The biggest condensation risk sits at rim joists and cold attic edges where warm moist air meets a cold surface. Our experience since 2016 covers the full range of Madison insulation work: attic foam and air sealing to stop the stack effect, closed cell and open cell spray foam for walls and crawl spaces, rim joist and band joist sealing for older Isthmus homes, insulation removal and replacement when existing insulation is damp or contaminated, and commercial and new construction spray foam for metal buildings and barndominiums in the Madison area.

Our services in Madison

How a Job Works in Madison

We start with a free on-site assessment. You tell us what you are seeing (a cold room, high heating bills, condensation in the attic or crawl space, or insulation that has failed) and we walk the space, measure what is there, and explain what has to happen next. We give you a written estimate with the R-value and thickness we are specifying, the area to be covered, and the price range for your job. No surprises, no pressure.

If existing insulation is wet, contaminated, or has settled so badly that it is no longer doing its job, it comes out first. We remove and dispose of the old material, then prepare the space for spray foam. For attics, we seal air bypasses around ductwork, electrical penetrations, and the rim where the roof meets the top plate. For crawl spaces and rim joists in older Madison homes, we make sure the substrate is dry before any foam goes on. We spray the foam to the thickness and R-value we specified, in controlled passes with the manufacturer ratio and drum temperature correct. During cure, mechanical ventilation runs to manage VOC off-gassing. We ask for a re-entry window of twenty-four to forty-eight hours before the space is fully occupied again.

When the foam has cured, we do a final walkthrough with you, walk you through what we have done and why, and leave your property clean. If you have questions after we leave, you have a local number to call.

Spray foam pricing in Madison starts with the area to be covered, the R-value and thickness you need, and whether you are using open cell or closed cell foam. Attic spray foam typically runs from $1.50 per square foot for open cell to $1.75 per square foot for closed cell, depending on the thickness and R-value required. Wall and injection foam runs from $2 per square foot. A rim joist or band joist job in an older Madison basement might start at $650. A full crawl space spray foam job starts at $2,500. If existing insulation has to be removed first, add $950 and up depending on the volume and what you are removing. The biggest cost factors are the area to cover, the R-value you need (which depends on your building code and your comfort goals), whether the substrate is wet or contaminated (if it is, it has to be fixed or we walk away), and how easy access is to the space you are spraying. We give you a written estimate at no charge. Call us at (608) 292-6626 for a free assessment and quote.

✅ Written Estimates with R-Value & Thickness Specs, fully insured for work in Madison and nearby areas.

I have an older home on Willy Street with a full basement and rim joists that sweat and frost every winter. What does spray foam do for that?
Rim joist and band joist condensation in older Madison basements is caused by warm, moist indoor air meeting a cold exterior surface in winter. Spray foam seals the air leakage and insulates the rim, stopping the air movement that brings moisture to that cold surface. We spray closed cell foam on the rim joist from the inside, sealing the rim to the foundation wall and the sill plate above. This stops the stack effect, reduces air leakage, and keeps that surface warm enough that condensation does not form. For a typical older Madison home, a rim joist job runs from $650 and takes a day. Call (608) 292-6626 to schedule a walkthrough.
My attic insulation is damp and smells musty. Can you just spray foam over it?
No. If insulation is wet, contaminated, or visibly moldy, it has to come out before any foam goes on. Spray foam traps moisture, and if moisture is already in the insulation, the foam will seal it in and make the problem worse. We remove the old insulation, dry the attic (or identify what is causing the moisture and fix it first), and then spray the foam. If there is active moisture coming from a roof leak or condensation from an unvented bathroom duct, we stop and tell you what has to be fixed before we spray. We fix the moisture first or we walk away. Call (608) 292-6626 to discuss your attic.
What does attic spray foam cost in Madison?
Attic spray foam in Madison typically runs from $1.50 to $1.75 per square foot, depending on whether you choose open cell or closed cell foam and the R-value you need. A 1,500 square foot attic with open cell foam at R-38 might run $2,250 to $2,625. If existing insulation has settled and needs to be removed first, add $950 to $1,500 depending on volume. The exact price depends on the area, the R-value your building code requires, and what has to be removed or sealed first. We give free written estimates with R-value and thickness specs. Call (608) 292-6626.
Who decides what R-value I need for my attic in Madison, and who inspects the work?
The energy code and building code in force at your address set the minimum R-value for attic insulation. Madison's building official enforces the code and inspects the work if a permit is required. Permits and contractor registration requirements vary from city to city across Greater Madison, so the first step is to check with the City of Madison or your local building department about what applies at your address. You can start at the City of Madison website to find the right department. We help you navigate what applies, and we work with your local building official on inspections. The ignition barrier and thermal barrier rules are set by code and enforced locally, not by us. We specify the R-value and thickness in writing, and we build to that spec.
I have a metal building in the Madison area. Can you spray foam the interior?
Yes. Metal buildings and barndominiums are common in the Madison area, and spray foam insulation on the interior of the metal shell is a straightforward job. We spray closed cell or open cell foam on the underside of the roof decking and the walls, sealing the metal and creating an insulated envelope. Metal buildings present access challenges (high ceilings, trusses, ductwork) that we plan for on site. Pricing typically runs from $1.75 per square foot depending on thickness and foam type. If your metal building is in a master-planned community, check with your HOA about any rules on interior work before we schedule. Call (608) 292-6626 for a free estimate.
Is your crew fully insured?
Yes. Madison Spray Foam Insulation is fully insured with general liability and workers' compensation coverage. We carry insurance to protect you and your property while we work. You can ask us for proof of insurance at any time. When you get estimates from any spray foam contractor, always verify their insurance coverage directly with their insurance carrier, never just take their word for it.
When is the best time to schedule spray foam insulation work in Madison?
Winter and early spring are the busiest seasons in Madison because that is when heating bills spike and homeowners see condensation and frost in their attics and crawl spaces. If you are noticing cold rooms, high heating bills, or moisture in your attic or basement, do not wait until January when the cold hits hard and contractors are booked weeks out. Fall (September through November) is a great time to schedule attic foam and air sealing work before the heating season. Summer is quieter, and if you have a room that stays hot despite air conditioning, summer is the right time to diagnose and fix it. Call (608) 292-6626 early to get on the schedule.
Why choose us?

Trusted professionals since 2016

🏅

Insured contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Fully Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sat 7am-6pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Spray Foam Insulation Services in Madison

All your work handled by qualified professionals in Madison

Attic Spray Foam Insulation

Attic foam built for Madison's long winters and ice dam season

Included in your service

  • Ice dam prevention along the eaves of older Isthmus homes
  • Air sealing top plates in mid-century Dane County attics
  • Continuous foam barrier sized for Madison's long cold winters
  • Blower door test to measure stack effect reduction here in Madison
Learn more→

Closed Cell Spray Foam Insulation

Closed cell protection for Madison's full basements and rim joists

Included in your service

  • High-density foam at rim joists across Dane County basements
  • Vapor retarder layer suited to Madison's humid summers
  • Rigid insulation for full basements on the Isthmus
  • Moisture control against condensation in Madison winters
Learn more→

Open Cell Spray Foam Insulation

Open cell fill for Madison's older walls and attics

Included in your service

  • Expanding foam fills stud bays in Willy Street area homes
  • Flexible air seal for Monroe Street bungalows and rentals
  • Sound-dampening fill for UW-Madison area rental walls
  • Vapor-open fill suited to Madison's humid summer swings
Learn more→

Wall & Injection Foam Insulation

Retrofit wall fill for Madison's balloon-framed houses

Included in your service

  • Drill and fill for uninsulated walls on the Isthmus
  • Matched siding patches for Willy Street area homes
  • Dense-pack fill for balloon-framed Monroe Street houses
  • Exterior access work suited to Madison's older housing stock
Learn more→

Crawl Space Spray Foam Insulation

Crawl space foam for Dane County additions and outbuildings

Included in your service

  • Sealed walls for crawl space additions across Dane County
  • Band joist foam to block moisture from Madison's humid summers
  • Vapor barrier upgrade next to full basement foundations
  • Moisture control tuned to Dane County's humid summer swings
Learn more→

Rim Joist & Band Joist Spray Foam

Rim joist sealing for Madison's full basements

Included in your service

  • Closed cell foam along rim joists in Isthmus basements
  • Frost and draft control where joists meet Dane County winters
  • Sealed band joist to stop condensation in full basements
  • Targeted foam pass sized for Madison's cold climate zone
Learn more→

Garage Spray Foam Insulation

Garage foam for Middleton, Fitchburg and Sun Prairie homes

Included in your service

  • Wall and ceiling foam for attached garages in Sun Prairie
  • Door header sealing for newer Middleton subdivisions
  • Heat retention upgrade for garages across Dane County
  • Air sealing suited to Fitchburg's two-story construction
Learn more→

Metal Building & Barndominium Spray Foam

Metal building foam for Sauk and Columbia county properties

Included in your service

  • Closed cell foam direct to steel in Columbia County buildings
  • Condensation control for barndominiums in Sauk County
  • Vapor barrier sized for this cold climate zone's winters
  • Thermal break foam for pole barns across Dane County
Learn more→

Commercial & New Construction Spray Foam

New construction foam for Dane, Sauk and Columbia counties

Included in your service

  • Whole-envelope foam before drywall in Sun Prairie builds
  • Commercial new construction foam across Dane County
  • Builder coordination for Fitchburg and Middleton projects
  • Air sealing in new builds matched to Dane County's cold climate zone
Learn more→

Insulation Removal

Old insulation removal for mid-century Dane County homes

Included in your service

  • Clearing settled fiberglass from mid-century Dane County attics
  • Removal of damaged material in older Isthmus homes
  • Clean-out before foam install in Madison basements and attics
  • Debris haul-away sized for Dane County rental properties
Learn more→

Insulation Replacement & Re-Insulation

Re-insulation for older Isthmus and mid-century Dane County homes

Included in your service

  • Full tear-out and foam re-install in Isthmus homes
  • Replacement sized for mid-century Dane County attics
  • New air barrier for rentals near UW-Madison
  • Upgrade from settled fiberglass to foam before Madison winter
Learn more→

Air Sealing

Air sealing to stop stack effect in Madison homes

Included in your service

  • Blower door test for homes across Dane County
  • Rim joist and top plate sealing before Madison winter
  • Bypass sealing for mid-century attics with ice dam history
  • ACH50 measurement suited to this cold climate zone
Learn more→
Verified client reviews

40+ Verified Client Reviews in Madison

⭐⭐⭐⭐⭐ 4.9/5 · 40 verified Google reviews

Free Quote

Get Your Free Quote

Spray Foam Insulation in Madison · Response within 24h · No commitment · ☎ (608) 292-6626

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Fully Insured 📍 On-site visits included in Madison ✅ No hidden fees 🕐 Available Mon-Sat 7am-6pm